2006 4runner using evo-one with T-Harness and rf kit RM-411. I wired up everthing according to guide #84911 except for the pink wire going to the parking lights. I cannot find a 28 pin connector so i left it off. The real issue is everything else should work but it is not acting right after updating the module and then hooking it up to the car and programing it the locks work and i can get one remote start but thats all, if i disconnect the battery and hook it back up i can get a crank but no start. the only way i can get it to remote start again is to un hook the module and start over reprogramming it to the car. Is there a cercain firmware version i need to be using? I've tried .81 for the rf kit and i have tried the newest one 1.24 i think. I used all the recomended setting according to the web site but nothing is working right.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
